PLC S5-S7 (X5/X7) Refurbishment
Brochure:  |
The Domain
Applicable in automation systems of 115U, 135U/155U and 150U of the Simatic S5 Compatible with CPU 416 with RS 7 Software Compatible with CPU 945 (941, 942, 943, 944) or CPU 948 (946/947, 928) with RS 5 Software Synchronous mode: S7 and S5 Program run concurrently (Particularly suitable for extensions of present plants IT function (Email Client, Webserver, FTP) Upgrade your S5 PLC to an S7 PLC in a Flash
Technical Details
Serial Interfaces:
|
1 x AS511 (TTY) or
RS232 with 15pin D-sub female,
1 x RS232 with 9pin D-sub male |
Ethernet-Interfaces:
10 / 100 Mbps |
2 x TP (RJ45)
(2- port Switch) |
| Interfaces optional: |
Keyboard and mouse via PS2
via PC-MIP:
4 x RS232
4 x RS422 / 485
graphics 1.280 x 1.024 |
Transport Protocols:
|
TCP/IP,
ISO on TCP (RFC1006) |
| Serial Protocols: |
3964(R), RK512, ASCII, STX/ETX |
| RAM Extension: |
64 MB SDRAM,
128 KB Bios Flash,
2 MB retained SRAM |
| Mass storage: |
Compact Flash 1 socket
for CF cards or microdrives |
| Power Supply: |
5 V +/- 5% @5A |
| Dimensions [in mm]: |
Height: 6 HE
Width: 8 TE |
Order Number
Height: 6 HE
Width: 8 TE |
700-4300-01 |
X5 / X7 CPU for
AG 135U/155U |
700-4310-01 |
X5 / X7 CPU for
AG 150U |
700-4320-01 |
RS 5 Software,
compatible with CPU 945 |
700-4330-01 |
RS 5 Software,
compatible with CPU 948 |
700-4331-01 |
RS 7 Software, compatible with CPU 416/945
(synchronous mode) |
700-4340-01 |
RS 7 Software, compatible with CPU 416/948
(synchronous mode) |
700-4341-01 |
Including serial parameterization cable
Note: The software can only be used in combination with a
X CPU hardware. For each X CPU one software module can be ordered. Please specify the order number of the RS Software with your X CPU order.
Accessories
PC MIP module, graphics, 1.280 x 1.024 PC MIP Extension Board Serial parameterization cable PC MIP module, 4 x RS422 / 485 PC MIP module, 4 x RS232
What is SYNCRHONOUS MODE?
The X CPU with RS 7 Software supports the so-called synchronous mode. This means that besides the S7 functions, the complete S5 functions are contained in the CPU. The existing S5 program is completely executable. Blocks from the S5 program do not have to be re-edited. They can be called in the S7 program.
S5 program and S7 program run simultaneously!
ADVANTAGES:
Step 5 blocks that can only be ported to S7 with high complexity, remain in Step 5 and are called from the Step 7 operating system. Access to external periphery, where blocks are only available in Step 5. Existing S5 hardware and S5 programs can be integrated into systems, that do not support S5 components (e.g. Simatic PC S7) Time-consuming and cost-intensive converting of programs is not applicable.
| IN THE PAST TO UPGRADE S5 TO S7
|
 |
UPGRADE TODAY
Hardware remains constant (exception: CPUs) S5 Program remains constant S7 Program and S5 Program run concurrently Time-saving, cost-effective
|
 |
|
|
|